Locate Model Numbers

Broan Customer Service
Email
or Call 800-558-1711
Hours: M-F 7:30 am - 6 pm CST

IMPORTANT:
About Broan Model Numbers

Some Broan model numbers have an alpha suffix.

Example: 41000-L.

It is important to refer to the exact model number with the alpha suffix when selecting parts, requesting service or speaking to a technical support representative regarding your Broan product.

Standard Under Cabinet

Broan Standard Under Cabinet Range Hood

Label Placement

The model label is located either on the right or left side wall of the range hood canopy.

Standard Under Cabinet Label Placement



Allure Under Cabinet

Allure Under Cabinet Range Hood

Label Placement

Remove range hood filters by pulling down on the filter tabs. The series number is located either on the back wall of the range hood housing or on the Teflon air pan. (Example...QS1, QS2 or QS3)

Allure Under Cabinet Label Placement




Broan Elite Fashion Style

Broan Elite Fashion Style

Label Placement

Remove range hood filters. The model label is located on the underside of the canopy behind the filters.

Broan Elite Fashion Style Label Placement



Broan Elite Professional Style

Broan Elite Professional Style Range Hood

Label Placement

The model label is located on the inside of left wall of the range hood canopy. Filters may need to be removed to access the label.

Broan Elite Professional Style Label Placement



Island Downdraft

Island Downdraft

Label Placement

The model label is located on the front of unit beneath the cook top.
Cabinet drawers or shelving may need to be removed to access label.

Island Downdraft Label Placement



Standard Bath Fan

Standard Bath Fan

Label Placement

Remove the grille by pulling down 2 inches. Reach behind the grille and squeeze the mounting springs to remove the grille. The model label is located in the corner closest to the outlet. Some fans may have the model stamped into the motor plate instead of a printed sticker label.

Standard Bath Fan Label Placement



Mid-Level Bath Fan

Mid-Level Bath Fan

Label Placement

Remove the grille by pulling down 2 inches. Reach behind the grille and squeeze the mounting springs to remove the grille. The model label is located on the underside of the motor plate.

Mid-Level Bath Fan Label Placement



Designer Style Bath Fan

Designer Style Bath Fan

Label Placement

Remove the glass lens which is attached by two leaf springs. Use a small flat head screwdriver to pry the glass lens from the grille. Screwdriver can be inserted into one of the small slots on the perimeter of the glass lens. To avoid scratching the surface of the grille the screwdriver can be wrapped in a thin cloth or tissue. Reach over lens and push in on springs to release. Grille is held by two screws along rim or a single nut in the center. The model label is located on the underside of the motor plate.

Designer Style Bath Fan Label Placement



Combination (Fan/Light) Bath Fan

Combination (Fan/Light) Bath Fan

Label Placement

Remove light lens by pressing in on the sides and pulling down. Remove the light bulb. Remove the light reflector and grille by removing the center acorn nut. The model label is located on either the inside perimeter of housing or underside of motor plate.

Combination (Fan/Light) Bath Fan Label Placement



Powered Attic Ventilators (PAVs)

Powered Attic Ventilators (PAVs)

Label Placement

The model label is located on the cover of the wiring box which is visible from the attic.

Powered Attic Ventilators Label Placement



Utility Ventilators

Utility Ventilators

Label Placement

Removed the grille by a central knob or two screws. The model may be ceiling or wall mounted. The label is located on the inside perimeter of housing opposite wiring panel.

Utility Ventilators Label Placement



Trash Compactor

Trash Compactor

Label Placement

The model may be free standing or installed under cabinet. The label is located inside on the right wall of housing at the motor level, access through rear service panel if drawer can not be removed.

All Broan 12" wide compactors use the same bags. Orders can be placed using Part #93620008 (12 pack).

All 15" wide units use bag #15TCBL (12 pack).

Trash Compactor Label Placement



Heaters

Heaters

Label Placement

Remove the grille by unhooking the springs from the housing.  The model number can be found inside the housing on a specification label.

Heaters Label Placement