Are the supplied LED bulbs replaceable?
According to the product overview, the bulbs have a 3 yr. warranty which is relatively short for an LED bulb.
I was able to take a flat head screwdriver to Lowe's hardware store where they had model number clda130ss on display and easily put the flat head screwdriver between the LED strip and hood tiny gap and pop the LED strip out just use a small skinny flat head screw driver and the Led strip is popped out it then has a piggyback plug that can also be unplugged with the tip of your flat head screwdriver. Then all you have to do is replace the LED strip module that you get from Broan. Plug the new LED strip module you get from Broan back into the piggyback cable connector then slide the whole module back up into the The slot and the LED strips should and do pop right back into place. I did a lot of research to find this I hope it helps someone else I also will provide pics of what the LED module looks like. Trust me i almost didnt buy the product because of this. Until i found out how easy it was just to pop out the strip and replace it if need be.
Date published: 2018-02-18
are the broan hoods made to extend 8 inches plus beyond the cabinets ?
love the design of the CLDA130SS WITH THE CUREVES BUT NOT SURE THAT ITS GOING TO LOOK RIGHT EXTENDING 8IN BEYOND MY CABINET
I have 12" deep cabinets and a 25" deep range top. The unit looks very good and provides good light over the cooking surfaces.
Date published: 2018-02-17
Even with everything off, there's a constant humming coming from the unit. Is this normal?
Thank you for your question on the Broan CLDA130SS Range Hood. Please contact Technical Support directly at 800-637-1453. They will want to know how loud this hum is. A slight hum from the transformer is normal but this hum is not audible unless you are right up on the unit.
Date published: 2018-01-04
Depth of cabinet
What depth of cabinet can the CLDA103BLS be mounted to if it is going to be ductless? Do not see a measurement of where the plate is that has to be removed for circulation.
Thank you for your question on the Broan CLDA130BLS range hood. This range hood is designed to fit a standard 12" deep cabinet When mounting ducted or duct free. If you have further questions please contact Technical Support at 800-637-1453.
Date published: 2017-10-10
How to remove fan wheel for cleaning?
Clip in shaft is easy, but fan wheel is tight on shaft. Is there a wheel puller for it? or is removal not advised?
After you remove the clip, you will pull on the fan blade hard to remove. You can push up on the motor shaft while pulling down on the blade. Please see picture included for more information. If you need more assistance, please contact Technical Support directly at 800-637-1453.
Date published: 2018-02-17