1 Additional Image

192Wall Heater, High Capacity, White, 1000/2000W 240VAC, 750/1500W 208VAC.

  • Overview
  • Room Sizing Guide
  • Specifications
  • Accessories
  • Reviews
  • Answers
  • This high capacity wall heater is powerful and rugged enough for commercial lobbies, entryways, vestibules, yet sufficiently attractive to fit in with residential decors. Factory wired at 2,000W, at 240V AC, it can be easily converted to 1,000W at 240V AC for added versatility.

    • Heavy-duty, 18-gauge steel grille has downflow louvers to direct heat gently toward the floor and a one-piece design with baked enamel finish for durability
    • Adjustable, front-mounted, heavy-duty thermostat offers a simple way to control the level of heat and thermostat security cover prevents tampering
    • Optional line-voltage wall thermostat (Model 86W sold separately) or timer (Models 59V or 59W 60-minute timer or Models 61V or 61W 15-minute timer) are available for a convenient way to control the heater
    • Built-in fan-delay allows the heating element to warm up before the fan starts to prevent cold air delivery and then keeps the fan running as the heating element cools down to maximize heat delivery and energy savings
    • Permanently lubricated motor, heavy-duty sheathed element with steel plate fins, and a manual reset thermal overload protector combine to ensure reliable operation and years of trouble free heating. UL Listed for safety.
    • Heater may be recessed or surface-mounted, depending on your application (surface mounting requires Model 85 surface mount kit)
    • Wall heaters are intended to provide supplemental heat from a wall location and not to take the place of a primary heat source
  • How To Size a Room – Quick Calculation

      Moderate Climate (with 8’ ceiling and adequate insulation)
    • Square Footage x 10 = Watts required
    • Example: 100 Sq. Ft. x 10 = 1,000 Watts

    • Colder Climate (with 8’ ceiling and adequate insulation)
    • Square Footage x 15 = Watts required
    • Example: 100 Sq. Ft. x 15 = 1,500 Watts

    How To Figure BTU’s

    • Wattage x 3.413 (constant) = BTU’s (British Thermal Unit)
    • Example: 1,000 Watts x 3.413 = 3,413 BTU’s
    • Example: 4,000 Watts x 3.413 = 13,652 BTU’s
    • One BTU is the quantity of heat needed to raise one pound of water one degree Fahrenheit

    How To Figure Amperage

    • Watts/Voltage = Amperage
    • Example: 1,000 Watts / 120 Volts = 8.33 Amps

    How To Figure Voltage

    • Watts/Amperage = Voltage
    • Example: 1,000 Watts / 8.33 Amps = 120 Volts

    How To Figure Wattage

    • Voltage x Amperage = Watts
    • Example: 120 Volts x 8.33 Amps = 1,000 Watts
    • Example: 240 Volts x 4.16 Amps = 1,000 Watts
  • Air Mover TypeFan
    Auto Shut-offYes
    BTU/hr at 120 VoltsN/A
    BTU/hr at 208 Volts2560/5120 BTU/hr
    BTU/hr at 240 Volts3413/6827 BTU/hr
    ControlsWall Switch
    cUL ListedNo
    Grille Dimensions - Height20-1/4"
    Grille Dimensions - Width16-3/8"
    Heater TypeFan-Forced Wall
    Housing Dimensions - Height18"
    Housing Dimensions - Width14-1/4"
    Housing FinishBlack
    Housing MaterialSteel
    Number of Heat SettingsVariable
    PortableNo
    Project PackNo
    ThermostatYes
    UL ListedYes
    Warranty1 Year
    Watts and Amps at 120 VoltsN/A
    Watts and Amps at 208 Volts750/1500 Watts and 3.61/7.21 Amps
    Watts and Amps at 240 Volts1000/2000 Watts and 4.17/8.33 Amps
  • (9 Questions : 9 Answers)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    « Back
     
     
    Has staff answer
    192
     
    1 answer

    How does the reset button work?

    Customer avatar
    by
    Denny
     on 192
    Unit is not working. Found reset button. Does not push in-how should the reset be activated?
    Age: 55-64
    User submitted photo
    User submitted photo
    2 months, 3 weeks ago
    Customer avatar
    by
    Denny
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model 192 wall heater. The reset button is a thermal overload breaker. If it senses too much heat it will open and shut off the heater. If the button does not push in, it would appear that it is not the problem with your unit. Please contact the Technical Service Department at 800-637-1453 for assistance.
    2 months, 2 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    192
     
    1 answer

    How do i turn off the wall heater model 192 as it only has high and low option?

    Customer avatar
    by
    Liz
    Collingswood, NJ, USA
     on 192
    My wall heater has been running for over 2 hours on low. Its is already very warm but its not shutting off. I need to know how to turn it off. Thank you.
    Age: 35-44
    Gender: Female
     
    Products related to my question
     
     
     
     
    3 months, 2 weeks ago
    Customer avatar
    by
    Liz
    Collingswood, NJ, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model 192 wall heater. This model does not have a positive off position. If on low and the heater is continuing to run, please contact the Technical Service Department at 800-637-1453 for assistance.
    3 months, 1 week ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Age: 45-54
    Gender: Male
    2 months, 1 week ago
    Customer avatar
    by
    Master
    Mayslake Retirement Center
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model 194 wall heater. The 194 comes complete with the rough-in box and ready to install in a wall. There is nothing more needed for in wall installation.
    2 months, 1 week ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    192
     
    1 answer

    What is the proper wiring and breaker size.

    Customer avatar
    by
    Tomtech
    United States
     on 192
    My installer says the model 192 needs 12 gauge wire and a 20 amp breaker.

    The master electrician I consulted says that a 15 amp breaker and 14 gauge wire is adequate for a 240 volt 2000 watt dedicated circuit installation.

    What is the recommended breaker amperage and wire gauge for a dedicated circuit installation for a 240 volt 2000 watt configuration model 192 high capacity wall heater.
    Age: 45-54
    Gender: Male
    6 months ago
    Customer avatar
    by
    Tomtech
    United States
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question regarding the 192 wall heater. The 192 will only draw 8.3 Amps so a 15 Amp dedicated circuit should be sufficient. 14 gauge wiring should also be sufficient but it wouldn’t hurt to use 12 gauge wiring. It might be best to check with your local code to verify proper wiring. You can also contact Technical Support at 1-800-637-1453 for further assistance.
    6 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    198
     
    1 answer

    Broan 198. Fan does not stay on for a cool down period.

    Customer avatar
    by
    Big Al
    Palo Alto, CA, USA
     on 198
    When the wall thermostat automatically turns off the heating the fan does not stay on for a cool down period, Can you tell me what is wrong.
    Big Al
    Age: 55-64
    Gender: Male
    5 months, 3 weeks ago
    Customer avatar
    by
    Big Al
    Palo Alto, CA, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model 198 wall heater. Please contact the Technical Service Department at 800-637-1453 for assistance.
    5 months, 3 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    2 next>>
    2 next>>