- The 88000 series from Broan offers an elegant yet powerful and quiet approach to ventilation. The under cabinet range hood features an infinite speed slide control with blower memory feature that saves last setting. Installs as 3-1/4 in. x 10 in. ducted opening and ducts either vertically or horizontally or in a non-duct recirculation mode. The hood includes a super quiet dual centrifugal blower, dual incandescent lighting, convenient slide controls, dual dishwasher safe grease filters.
- Convenient slide controls – infinitely adjustable blower speed
- Infinite speed slide control with blower memory feature that saves last settings
- Standard Heat Sentry™ detects excessive heat and turns blower to high
- Powerful, quiet 360 CFM, 5.5 Sone (vertical discharge) or 350 CFM, 6.0 Sone (horizontal discharge) performance – HVI Certified
- Convertible to ducted or non-ducted operation. Includes 3-1/4 x 10" damper/adapter
Non-Ducted Filter sold separately
- Accepts two 75 watt bulbs.
Bulbs not included
Cleaning a Range Hood Filter – Danny Lipford
Proper Use of a Range Hood- Danny Lipford
How to Ventilate the Whole House
Proper Ventilation Equals A Healthy Home - Danny Lipford
What are CFMs? - Danny Lipford
Range Hood & Ventilation Fans Tip - Check Terminations of Ventilation Ducts
How do I determine the size of the range hood I need? - Danny Lipford
Is there any regular maintenance needed on my range hood? - Danny Lipford
Does an Over the Range microwave provide adequate Capture? - Danny Lipford
Give Your Kitchen a 72-Hour Facelift with Danny Lipford
Island Range Hoods for Kitchen Upgrades - Danny Lipford
Importance of a Range Hood for Indoor Air Quality
Kitchen Renovation Includes Adding Range Hood with Danny Lipford
Can I install a range hood without venting it? - Danny Lipford
Keep your kitchen clear of smoke and fumes. Don't neglect ventilation when remodeling your kitchen, ConsumerReports.org
Cook with a gas stove? You could be breathing polluted air, study says, Los Angeles Times
Using gas stoves with no hood may expose many to air pollution, UPI Health News
Breathe Easy – What you need to know to ensure proper home ventilation, K+BB
5 Kitchen Renovation Goofs To Avoid, Consumer Reports
Clearing the Air, K+BB
The Kitchen as a Pollution Hazard
Fixing Stove Hoods To Keep Pollution Out Of The Kitchen
|Accommodates Ceiling Height||N/A|
|Blower Air Mover Type||Dual Centrifugal Blower|
|Cabinet Width (inches)||42"|
|Control Feature Filter Reminder||No|
|Delay Shut Off||No|
|Dishwasher Safe Filters||Yes|
|Duct Connector Size||3-1/4" x 10"|
|ENERGY STAR® certified product||No|
|Flue Accommodates ceilings up to xx ft||N/A|
|Heat Sentry - Temperature Sensor||Yes|
|Light Bulb Quantity||2|
|Light Bulbs Included||No|
|Max Sones/100 CFM||1.7|
|Minimum Height Above Cook Top||18"|
|Mounting Type||Under Cabinet|
|Product Depth (inches)||20"|
|Product Height (inches)||9"|
|Product Width (inches)||42"|
|Sones Certified Horizontal Rectangular High||6.0|
|Sones Certified Horizontal Rectangular Low||N/A|
|Sones Certified Vertical Rectangular High||5.5|
|Sones Certified Vertical Rectangular Low||N/A|
|Sones Certified Vertical Round High||N/A|
|Sones Certified Vertical Round Low||N/A|
|Switch Control Settings||Variable|
884223 is rated
Rated 5 out of
I like everything about our new broan hood its quiet the lighting is great
when i was in the cabinet business i used broan hoods only and now that i have finally retired after 47 years my wife said its about time t get us an uodated hood and we finally got our own broan 88000 series hood . love it
Date published: 2017-11-15
Rated 1 out of
Nice Product but....
This is a nice product at a reasonable price. However, I am on my third exchange do to either poor manufacture, poor packaging, or blatent shipping damage. The product is NOT packed well enough to sustain UPS shipping. Really disapointing! Products almost look like seconds or refurbished.
Date published: 2017-01-24
Rated 2 out of
difficult to keep clean; light switch flimsy
We have had one of these hoods for years. The alcoves --the hollow areas on either side of the blower up above the filters-- are impossible to keep clean. Also, oil and grease collects in the wells at the bottom of the filters, and the metal is sharp there, so it is easy to cut your fingers when wiping out those wells. A better design would eliminate nooks and crannies to make it as easy as possible to keep clean. The sliding on/off switch for lights is plastic and with repetitive use will one day snap, and it's expensive and a pain to repair, requiring complete disassembly of the unit and the purchase of an entire assembly, not just the broken part. That front panel should simply snap out to make such a repair, but it doesn't. The fan is relatively noisy when vented out the rear and running at or near top speed. It doesn't do a great job removing smoke such as when grilling a steak at a fairly high heat. The two small bulbs are in the front, and so the rear of the cooktop is not well lit. We bought the unit because of its size (33") but then Broan discontinued that size in the lineup.
Date published: 2013-09-03
Rated 5 out of
Perfect unit for space in our kitchen
This is our second ...1st lasted 20 plus years...the extra fiber filter insert provide excellent smoke control...simple design, but excellent performance
Date published: 2013-08-22
Rated 5 out of
Just what we were looking for
We are very pleased with the look of the range hood and operation of the exhaust fan. The color matched our other appliances perfectly. Great product at a fair price.
Date published: 2013-02-20
How many inches should be between a gas range and the bottom of a 883904 range hood?
I have a 40" gas range and I'm installing a 39" Broan model #883904 range hood. It currently measures 33" between the top of the gas range burners and the bottom of the range hood. Is the a good distance or should it be less space in between?
Thank you for your question on the model 883904 range hood. For the best capture of cooking impurities the bottom of the 883904 should be mounted 18 – 24 inches above the cooking surface.
Date published: 2015-06-30
Can the 3 1/4 x 10 inch duct be transitioned into a 6" duct?
I would like to purchase this hood to go over a slide-in Electrolux induction range. The existing ductwork is 3 1/4 inch transitioning into 6 inches. I s this acceptable for this model?
Thank you for your question on the model 883004 range hood. The 3-1/4" x 10" duct can be transitioned to a 6" round using model number 411. We would prefer to recommend transitioning to a 7" round using the 412H model number. It is always better to use a larger duct size if at all possible. For further discussion, please contact our Technical Support at 800-637-1453..
Date published: 2016-08-29
motor does not turn on
my motor does not turn on but I can hear the homing sound whenever the switch is on.
Thank you for your question on the model 883023 range hood. From your description it sounds like the blower wheels are bound up or the motor needs to be replaced. Please contact the Technical Service Department at 800-637-1453 for assistance.
Date published: 2015-10-28
On a 30" hood, how far does the end angle in after the 12" mark.
Due to my cabinet placement, I have a depth problem. The 17-l/2" would work but I would like a hood with more CFM. On a 30" hood, does the 88000 series angle in enough to give me less depth so I do not bang my cabinet doors? What is the length of the front portion of the 30" hood?
Thank you for your question on the model 883004 range hood. Please contact our Technical Service Department at 800-637-1453 and we can assist you.
Date published: 2013-10-23
Where is this unit made?
Thank you for your question on the model 883004 range hood. The 883004 is manufactured in Hartford, Wisconsin.
Date published: 2014-02-17