1 Additional Image

PM390Broan 390 CFM 20-1/2" wide, Custom Power Pack in Silver Paint Finish

  • Overview
  • Video Links
  • Specifications
  • Accessories
  • Reviews
  • Answers
  • The Broan Custom Power Module PM390 is a fully integrated range hood system designed to fit flush with the bottom of a cabinet or custom hood installation. Select this silver-finished blower with multi-speed control to provide quiet, effective performance. Incandescent lighting complements the beauty of a fully enclosed bottom containing dishwasher-safe filters to make cleaning easy. Designed to be used with Broan's "Box" or "T" design custom liners.

    • Durable, powder coated silver finish and a fully enclosed bottom ensure this hood is easy to clean and will not discolor
    • Three-speed slide controls provide 390 CFM of exhaust at 8.0 Sones
    • The enclosed lighting area is home to dual incandescent 40-watt candelabra bulbs (purchased separately)
    • One-piece, washable aluminum mesh filter means you can maintain optimum grease capture and keep the kitchen fresh
    • The choice of 6" round duct (includes damper and adapter) or non-ducted discharge allow you to make the right installation decision for your home
    • Optional non-ducted filter kit model 357NDK for indoor exhaust recirculation (includes duct accessories & charcoal filter), sold separately. Replacement charcoal filter is B08999040
    • Optional 30" and 36" liners (LB30, LB36, LT30 & LT36) allow you to create a custom enclosure and protect your cabinetry (sold separately)
    • Heat Sentry™ detects excessive heat and adjusts blower to high speed automatically
  • Video Links

    Broan Universal Make-Up Air Damper

    Residential Kitchen Make-Up Air Webinar September 24, 2013

    Island Range Hoods for Kitchen Upgrades – Danny Lipford

    Cleaning a Range Hood Filter – Danny Lipford

    Proper Use of a Range Hood- Danny Lipford

    How to Ventilate the Whole House

    Proper Ventilation Equals A Healthy Home - Danny Lipford

    What are CFMs? - Danny Lipford

    Range Hood & Ventilation Fans Tip - Check Terminations of Ventilation Ducts

    How do I determine the size of the range hood I need? - Danny Lipford

    Is there any regular maintenance needed on my range hood? - Danny Lipford

    Does an Over the Range microwave provide adequate Capture? - Danny Lipford

    Give Your Kitchen a 72-Hour Facelift with Danny Lipford

    Island Range Hoods for Kitchen Upgrades - Danny Lipford

    Importance of a Range Hood for Indoor Air Quality

    Kitchen Renovation Includes Adding Range Hood with Danny Lipford

    Can I install a range hood without venting it? - Danny Lipford

    Article Links

    How to Construct a Custom Kitchen Range Hood HGTV.com

    Keep your kitchen clear of smoke and fumes. Don't neglect ventilation when remodeling your kitchen, ConsumerReports.org

    Cook with a gas stove? You could be breathing polluted air, study says, Los Angeles Times

    Using gas stoves with no hood may expose many to air pollution, UPI Health News

    Breathe Easy – What you need to know to ensure proper home ventilation, K+BB

    5 Kitchen Renovation Goofs To Avoid, Consumer Reports

    Clearing the Air, K+BB

    The Kitchen as a Pollution Hazard

    Fixing Stove Hoods To Keep Pollution Out Of The Kitchen

  • Accessories OptionalYes
    Accommodates Ceiling HeightN/A
    Blower Air Mover TypeCentrifugal Blower
    Blower IncludedYes
    Boost ModeNo
    CFM (Airflow)390
    Color/FinishSilver
    Control Feature Filter ReminderNo
    Damper IncludedYes
    Delay Shut OffNo
    Digital ClockNo
    Dishwasher Safe FiltersYes
    Duct Connector Size6" Round
    ENERGY STAR® qualifiedNo
    Filter IncludedYes
    Filter TypeAluminum
    Flue Accommodates ceilings up to xx ftN/A
    Heat Sentry - Temperature SensorYes
    HVI CertifiedYes
    Light Bulb Quantity2
    Light Bulbs IncludedNo
    Lighting FunctionN/A
    Lighting TypeIncandescent
    Max Sones/100 CFM1.5
    Minimum Height Above Cook Top24"
    Mounting SystemBuilt-In
    Mounting TypeBuilt-In
    NightlightNo
    Non-Ducted Re-circulation CapableOptional
    Non-Stick CoatedNo
    Product Depth (inches)11-1/4"
    Product Height (inches)9-5/8"
    Product Width (inches)20-1/2"
    Rated Amps2.9
    Remote ControlNo
    Sones Certified Horizontal Rectangular HighN/A
    Sones Certified Horizontal Rectangular LowN/A
    Sones Certified Vertical Rectangular High6.0
    Sones Certified Vertical Rectangular LowN/A
    Sones Certified Vertical Round HighN/A
    Sones Certified Vertical Round LowN/A
    Switch Control Settings3
    Switch StyleSlide
    TimerNo
    UL ListedYes
    Voltage120
  • Rated 4.3 out of 5 by 55 reviewers.
    Rated 4 out of 5 by It is a good product with reasonable sound level and appearance It is a good product with reasonable sound level and appearance. I suggest the manufacturer should provide 2 bulbs along with unit which will give a customer satisfaction with little money and not to waste time on what bulb it fits. August 4, 2015
    Rated 3 out of 5 by Not that great a product. This product is very noisy, and the lighting very poor. I had a much better Broan product in my previous house that I just loved. Had no choice with this one, the builder installed it. July 16, 2015
    Rated 3 out of 5 by Plenty of Draft This is a good unit that moves lots of air but very loud even on low speed. Lighting is minimal but using 60 watt bulbs rather than 40 watt solves that problem. August 15, 2015
    Rated 5 out of 5 by Easy to install and works great! This was so easy to install and works great . I have had it for about 3 months and would highly recommend it. May 23, 2015
    Rated 4 out of 5 by Great insert Arrived quickly, in perfect condition, install instructions well written, was easy to install, has three speeds - high was powerful and fairly quite, nothing out of the ordinary,the double lights are sufficient, all around great product. May 21, 2015
    Rated 4 out of 5 by Works Great! Be sure and have your light bulbs on hand because they're not included, The recommended liner does not fit, if you order it, you'll be returning it. The fan is a little loud on top speed and middle speed is just fine. Also, I am really shocked that none of the reviewers mentioned how difficult it is to get the cover in place. It looks easy enough, but we had a devil of a time getting it to stay on! I'm now dreading the day when we have to take it off to change light bulbs! Did we miss something? April 3, 2015
    Rated 4 out of 5 by very basic product but does what i need the hood vent is perfect for what I use it for. I have no problems with this hood and it has been working just fine. February 14, 2015
    Rated 4 out of 5 by Overall There were installation pieces missing from two different boxes Overall: quite pleased with this unit. Installation: one person and very easy. Operation: lighting is good, odour, smoke, etc removal works very well. Cons: would be nice to have the capability to remote the switching for the unit. Definitely recommend this unit! February 7, 2015
    • 2015-09-03T07:46:53.495-05:00
    • bvseo_lps, prod_bvrr, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasreviews, tv_55, tr_55
    • loc_en_US, sid_99e28416-c640-43c7-99d3-75dd5ba00be9, prod, sort_default
    2 3 next>>
  • (59 Questions : 66 Answers)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    « Back
     
     
    Has staff answer
    PM390
     
    1 answer

    mount into cabinet

    Customer avatar
    by
    ACG
     on PM390
    Instead of a hood, we plan to use a 12" deep cabinet above the range. Can I mount this into the 12" cabinet and use it as a non-ducted hood?
    2 weeks, 6 days ago
    Customer avatar
    by
    ACG
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model PM390 kitchen exhaust system. The PM390 should be able to go into a 12” deep cabinet. The cabinet would need to have an internal height of at least 16”. The hole in the bottom of the cabinet would need to be 19-1/2” x 10-1/4”. Please contact the Technical Service Department at 800-637-1453 if you need further assistance.
    2 weeks, 5 days ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    PM390
     
    1 answer

    Fan comes on spontaneously.

    Customer avatar
    by
    Mari
    Canton, MI, USA
     on PM390
    While having hardwood floors installed upstairs (with much banging and vibration) my fan kept going on and off. The switching seemed to correspond to impacts that shook the walls. Before I call an electrician, could this be caused by the thermal sensor being subjected to unnatural vibration? Worried that there may be a loose connection somewhere and a fire hazard.
    Age: Over 65
    Gender: Female
    1 month ago
    Customer avatar
    by
    Mari
    Canton, MI, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on your PM390 range hood insert. It is very well possible that something has come loose inside the unit. Please give our Technical Support department a call at 1-800-637-1453 for more assistance. They can supply you with service repair agencies if necessary. Please know this would not be a fire hazard. Thank you.
    1 month ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    PM250
     
    1 answer

    PM250 -is this a recirculating ventilation fan.

    Customer avatar
    by
    Kglide
    United States
     on PM250
    I have cabinets that cannot be vented to the outside because of heating and air vents that are in the way. I am now in the process of remodeling my kitchen, and I purchased the PM250 to place over the stove in my custom cabinet for a recirculating ventilation fan. I also bought the 356NDK non-ducted recirculation kit module au charbon. Now I'm confused. I wanted the air to come back out at the bottom (back toward the stovetop). The PM250 and recirculating kit looks like it will go straight up and out of my cabinets at the top. Should I purchase another one of your products instead, or is there a way to make the PM250 work for me?
    Age: 55-64
    Gender: Female
    2 weeks, 2 days ago
    Customer avatar
    by
    Kglide
    United States
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model PM250 custom kitchen exhaust power unit. The PM250 is designed to be vented to the outside, but the model 356NDK does give you the option of making it non-ducted. Using the 356NDK, you do need to run seven inch ducting from the top of the PM250 to a 4” x 10” angle boot and vent it out of the soffit above the cabinet. If you cannot run the ducting through the cabinet above, or you do not have a soffit above the cabinet, the 356NDK would not work for you. There is no option for the air to come back out at the bottom (back toward the stovetop). Please contact the Technical Service Department at 800-637-1453 if you need further assistance.
    2 weeks, 1 day ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    PM390
     
    1 answer

    Damper

    Customer avatar
    by
    Kevin
     on PM390
    Is the damper necessary? I recently noticed my unit was making very loud noises and noticed the damper was pushed all the way to the top of the duct work and was at an angled position. This was restricting airflow and contributing to the loud noises. The HVAC company that installed the unit just came out and removed the damper. They stated that it was not necessary because the louvers would allow for proper airflow. What are the benefits of having the damper? If it is recommended, is there a way to prevent it from floating around and making sure it is anchored and will still allow airflow when necessary?

    Thanks
    2 months ago
    Customer avatar
    by
    Kevin
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model PM390 kitchen exhaust system. The damper that comes with the PM390 is designed to be installed directly on top of the unit and have the six inch duct work connected to it. It is a gravity damper and needs to be mounted in a vertical run of duct work. If it is mounted at an angle, it is not going to work properly. The damper is designed to keep air from coming back into the kitchen. Please contact the Technical Service Department at 800-637-1453 if you need further assistance.
    2 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    PM250
     
    1 answer

    Duct work for PM250

    Customer avatar
    by
    KevinG
    Woodbridge,NJ
     on PM250
    I bought 7 Inch Duct work for the exhaust on Model PM250 and the 7 inch does nor fit around the collar of fan unit why ????
    Age: 55-64
    Gender: Male
    1 month ago
    Customer avatar
    by
    KevinG
    Woodbridge,NJ
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model PM250 kitchen exhaust system. The duct collar for the PM250 should measure 6-7/8 inches and there should be no problem attaching seven inch duct work to it. Please contact the Technical Service Department at 800-637-1453 for assistance.
    4 weeks, 2 days ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    • 2015-09-03T07:48:59.439-05:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_99e28416-c640-43c7-99d3-75dd5ba00be9, prod, sort_default
    2 3 next>>
    • 2015-09-03T07:48:59.442-05:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_99e28416-c640-43c7-99d3-75dd5ba00be9, prod, sort_default
    2 3 next>>