1 Additional Image

165FProject Pack Finish Unit. Use 171H Project pack housing for rough-in. 500W 120/240VAC, 375W 208VAC. White grille.

  • Overview
  • Room Sizing Guide
  • Specifications
  • Accessories
  • Reviews
  • Answers
  • This wall heater is perfect for bathrooms, entryways, or other small areas where you need added warmth on demand. Factory wired at 500W, at 240V AC, it can be easily converted to 500W at 120V AC for added versatility.

    • Finish kits are sold in single-pack quantities and are used in conjunction with a 171H Rough-In Housing Kit. NOTE: Housing (model 171H) shown in photo above is sold separately
    • White grille has downflow louvers to direct heat gently toward the floor and a one-piece design with baked enamel finish for durability
    • The heater can be operated using the BROAN Model 86W Line-Voltage Thermostat from a wall location or the BROAN Model 83 Integral Thermostat installed into heater (purchase the control separately). Or, use a timer (Models 59V or 59W 60-minute timer or Models 61V or 61W 15-minute timer sold separately) for a simple and convenient way to control the heater
    • Rapid warm up time due to an efficient Alloy heating element that provides comforting heat in seconds
    • Heater may be recessed or surface-mounted, depending on your application (surface mounting requires Model 84 surface mount kit sold separately)
    • Permanently lubricated motor, high efficiency blower wheel, Nickel-chrome alloy heating element and a manual reset thermal overload protector combine to ensure reliable operation and years of trouble free heating. UL Listed for safety.
    • Wall heaters are intended to provide supplemental heat from a wall location and not to take the place of the home’s main heat source
  • How To Size a Room – Quick Calculation

      Moderate Climate (with 8’ ceiling and adequate insulation)
    • Square Footage x 10 = Watts required
    • Example: 100 Sq. Ft. x 10 = 1,000 Watts

    • Colder Climate (with 8’ ceiling and adequate insulation)
    • Square Footage x 15 = Watts required
    • Example: 100 Sq. Ft. x 15 = 1,500 Watts

    How To Figure BTU’s

    • Wattage x 3.413 (constant) = BTU’s (British Thermal Unit)
    • Example: 1,000 Watts x 3.413 = 3,413 BTU’s
    • Example: 4,000 Watts x 3.413 = 13,652 BTU’s
    • One BTU is the quantity of heat needed to raise one pound of water one degree Fahrenheit

    How To Figure Amperage

    • Watts/Voltage = Amperage
    • Example: 1,000 Watts / 120 Volts = 8.33 Amps

    How To Figure Voltage

    • Watts/Amperage = Voltage
    • Example: 1,000 Watts / 8.33 Amps = 120 Volts

    How To Figure Wattage

    • Voltage x Amperage = Watts
    • Example: 120 Volts x 8.33 Amps = 1,000 Watts
    • Example: 240 Volts x 4.16 Amps = 1,000 Watts
  • Air Mover TypeFan
    Auto Shut-offYes
    BTU/hr at 120 Volts1707 BTU/hr
    BTU/hr at 208 Volts1280 BTU/hr
    BTU/hr at 240 Volts1707 BTU/hr
    ControlsWall Switch
    cUL ListedNo
    Grille Dimensions - Height9-1/4"
    Grille Dimensions - Width12"
    Heater TypeFan-Forced Wall
    Housing Dimensions - Height7-3/4"
    Housing Dimensions - Width10-1/4"
    Housing FinishOff White
    Housing MaterialSteel
    Number of Heat SettingsVariable
    PortableNo
    Project PackYes
    ThermostatNo
    UL ListedYes
    Warranty1 Year
    Watts and Amps at 120 Volts500 Watts and 4.16 Amps
    Watts and Amps at 208 Volts375 Watts and 1.80 Amps
    Watts and Amps at 240 Volts500 Watts and 2.08 Amps
  • (1 Question : 1 Answer)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    « Back
     
     
    Has staff answer
    165F
     
    1 answer

    Do I need to purchase a thermostat for this to operate?

    Customer avatar
    by
    ADW
    Texas, USA
     on 165F
    Age: 45-54
    Gender: Male
    4 months, 2 weeks ago
    Customer avatar
    by
    ADW
    Texas, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model 165F wall heater finish kit. The 165F is a finish kit for use when the model 171H rough-in housing was previously installed. The 165F does not contain a thermostat. You would need to purchase a line-voltage thermostat for a wall location or the model 83 integral thermostat to install into heater. Please contact the Technical Service Department at 800-637-1453 if you need further assistance.
    4 months, 1 week ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    • 2016-02-11 T06:28:32.869-06:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_9cd18f41-750d-4e0d-a329-cf57aac09529, prod, sort_default
    1 of 1
    • 2016-02-11 T06:28:32.871-06:00
    • bvseo_lps, prod_bvqa, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasquestionsanswers
    • loc_en_US, sid_9cd18f41-750d-4e0d-a329-cf57aac09529, prod, sort_default
    1 of 1