Where in Canada can I buy the bathroom exhaust fan model 673?
I went through much of the suppliers listed and no one carries it. Greg
Thank you for your question on the model 673 exhaust fan. Please contact our Canadian office at 888-882-7626 for assistance.
Date published: 2015-01-09
Is the Model #673 the same as the Model #673-C?
The fan in our bathroom died. Need to replace. Our sticker indicates it's a Model #673-C, but only see Model #673 on your website.
Thank you for your question on the model 673-C vertical discharge exhaust fan. The “C” is just a revision letter. The current 673 would be the same unit.
Date published: 2015-10-26
Is the fan model 673 different than the 673-C?
I have a model 673-C fan. Can you confirm the part number for a new motor?
Thanks very much.
Thank you for your question on the model 673 vertical discharge exhaust fan. The “C” would just be a revision number. The part number for the motor would be 99080199 and you can get it through the “Shop for Parts” link at the top of our web site page or by contacting Customer Service at 1-800-558-1711.
Date published: 2015-02-23
I installed a Leviton RTD01 Fan Speed Controller and Light Dimmer combination switch with my Broan 673C fan. Everything seemed to work ok initially, but the first time I ran the fan in actual use the fan overheated and quit working after less than 5 minutes. Should the fan have worked ok with this controller? The speed controller has 5 positions -- off, max, high, med, low -- and I did notice that the speed on max was lower than on high (max and med about the same), so maybe the controller was faulty.
Thank you for your question on the model 673 vertical discharge fan. The 673 is designed to work with our model 78W or 78V, four speed fan control. Since the unit has not been tested with the Leviton RTD01 control, we cannot tell you if it works with this control or if the control was defective. Please contact the Technical Service Department at 800-637-1453 for further assistance.
Date published: 2014-09-23
Can a light be retrofitted on a 673 model exhaust fan?
I am finishing an upgrade of my bathroom and have hit a snag with this fan in the bathroom. The fan motor works fine, but I would like to add a light fixture to the fan to improve lighting in that section of the bathroom. Is there a possible solution/retrofit add-on to make this exhaust fan become an exhaust fan and light?
Thank you for your question on the model 673 exhaust fan. There is no option to install a light on the model 673. If you need a unit with a light, you will need to completely remove the 673 from the ceiling and install a different model.
Date published: 2014-06-30