Can this fan be installed as a replacement for an old fan where there is no access from above?
Can this be installed as a replacement for an old fan, in a first floor powder room where there is no attic access?
Thank you for your question on the model QTRE110 exhaust fan. This unit can be installed when there is no access from above, but you will need to remove more of the ceiling than would normally be necessary and repair the ceiling after the installation.
Date published: 2013-10-23
Something quieter than the QTRE110-B?
Our builder installed a QTRE110-B. At 1.3 sones, it is quiet, but we were hoping for something more like the ULTRA series (<0.3 sones).
Is there a model that has the very low sones that can retrofit into the housing for the QTRE110-B? The builder did install the current fan with 4" ducting. I'd really like to avoid removing the whole housing.
Thank you for your question on the model QTRE110 exhaust fan. The only parts that will work in the QTRE110 housing are the original replacement parts. If you need an exhaust fan that is quieter, you would need to completely remove the QTRE110 and replace it with another model. It would also be possible that you would need to change out the duct work to six inch.
Date published: 2013-12-02
Rough In Housing
I purchased just the finish piece, the QTRE110 trim/motor. What would the rough in housing model number be for these fans?
Thank you for your question on the QTRE finish kits. The part number for the housing pack would be QTXR000HF
Date published: 2017-02-17