2678FBROAN 2678F Bathroom Fan/Light Finish Pack 50 CFM Model 2678F

  • Overview
  • Specifications
  • Accessories
  • Reviews
  • Answers
  • Baths up to () Sq Ft45
    Ceiling InstallationYes
    CFM @ 0.10"50
    CFM @ 0.125"N/A
    CFM @ 0.25"39
    ColorWhite
    CSANo
    cUL ListedNo
    Duct DirectionHorizontal
    Duct Size4"
    ENERGY STAR® qualifiedNo
    Globe Glass ColorN/A
    Grille FinishWhite Polymeric
    Grille Length10-5/8"
    Grille Width11-1/8"
    Heater wattageN/A
    Housing Dimensions L x W x H8" x 8-1/4" x 5-3/4"
    Housing Height5-3/4"
    Housing Length8"
    Housing Width8-1/4"
    Humidity SensingNo
    HVI CertifiedYes
    Light Bulb Quantity1
    Light Bulb Wattage100 Watts
    Light Bulbs IncludedNo
    Lighting TypeIncandescent
    MaterialPolymeric
    Minimum construction space required2x6
    Motor engineered for continuous operationNo
    NightlightNo
    Product Weight12.0 lbs
    Project PackYes
    Rated Amps1.6
    Rated Sones - VerticalN/A
    Rated Watts42.4
    Sones2.5
    UL Listed for use over bathtubs or showers when connected to a GFCI circuitYes
    Wall InstallationNo
    Warranty1 Year
    Watts @ 0.1"42.4
    Watts @ 0.25"41.6
  • Rated 1 out of 5 by 1 reviewer.
    Rated 1 out of 5 by leaks outside air like crazy! this unit is loud when running but the worst part is the outside air that leaks through the flapper, when not in use, that makes a constant flapping noise when it's even a little windy. The cold air that leaks in when it is winter time and even a little windy outside is incredible. What a horrible design on the flapper that is suppose to keep the air out when the unit is not in use. October 6, 2014
    1-1 of 1
  • (4 Questions : 4 Answers)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    « Back
     
     
    Can I use the existing housing and just swap out the fan, light and lens? Thank you.
    Age: 45-54
    Gender: Male
    1 year, 2 months ago
    Customer avatar
    by
    Doug
    Binghamton, NY, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model 2678F project pack. Please contact our Customer Service Department at 800-558-1711 for assistance.
    1 year, 2 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    -1point
    0out of 1found this answer helpful.
    Was this helpful?helpful0unhelpful1
    Age: Over 65
    Gender: Male
    1 year ago
    Customer avatar
    by
    bassman
    MARYNEAL, TX
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model 678 exhaust fan/light. To install the grille on the 678, you need to place the reflector inside the grille and place both pieces against the ceiling at the same time. There is a stud on the motor mounting bracket that will come down through the hole in the top of the reflector. You would place a nut on the stud to hold the grille and reflector assembly tight against the ceiling. Please contact the Technical Service Department at 800-637-1453 for further assistance.
    1 year ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    The room has 77 sq.ft. with an 8ft ceiling...I read that with those dimensions I should have around 90 CFM . Is it possible to upgrade my 678F to increase the CFM, or do I have to replace it with a larger capacity unit?
    Age: Over 65
    Gender: Male
    4 months, 2 weeks ago
    Customer avatar
    by
    Bob
    Maryville, TN, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question. In order to increase the CFM from what you currently have installed, you will need to change the entire unit, including the housing. There is no retro-fit where you can use what you have now.
    4 months, 2 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Age: 55-64
    Gender: Male
    4 weeks ago
    Customer avatar
    by
    Charlie
    Aurora, OH, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model 2678 exhaust fan/light finish kit. There are two fan/light combos that use the same size ceiling cut out. The model HD80L is 80 CFM and the model 680 is 100 CFM. Please contact the Technical Service Department at 800-637-1453 for further assistance.
    3 weeks, 6 days ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    1 of 1
    1 of 1