QT110LEVery Quiet 110 CFM ENERGY STAR® Fan with Light and Night Light Model QT110LE

  • Overview
  • Specifications
  • Reviews
  • Answers
  • Energy efficient solutions in traditional designs. A bath fan needn’t call attention to itself, especially when you don’t want it to overpower the design of your bath or powder room. More important, it shouldn’t call attention to itself on your electric bill. With energy efficiency for the high-traffic bathroom, the QT110LE simply does its job quietly, in every sense of the word.

    • 110 CFM
    • 1.0 Sones HVI Certified
    • ENERGY STAR® Qualified
    • 36 watt fluorescent light (2-18 watt GU24 CFL bulbs included)
    • 4 watt night light (bulb included)
    • 4" duct connector
    • Motor engineered for continuous operation
    • UL Listed for use over bathtubs or showers when connected to a GFCI protected branch circuit
    • Fits in 2" x 8" ceiling construction; housing dimension: 10-1/2" L x 11-3/8" W x 7-5/8" H
    • Grille dimension: 12-3/8" x 14"

    Buy this Bath Fan online at menards_logo
    Additional BROAN Bath Fans are available at Menards.
    Find your nearest Menards store.

  • Ceiling InstallationYes
    CFM @ 0.10"110
    CFM @ 0.125"N/A
    CFM @ 0.25"98
    ColorWhite
    CSANo
    cUL ListedNo
    Duct DirectionHorizontal
    Duct Size4"
    ENERGY STAR® qualifiedYes
    Globe Glass ColorN/A
    Grille FinishWhite Polymeric
    Grille Length12-3/8"
    Grille Width14"
    Heater wattageN/A
    Housing Dimensions L x W x H10-1/2" x 11-3/8" x 7-5/8"
    Housing Height7-5/8"
    Housing Length10-1/2"
    Housing Width11-3/8"
    Humidity SensingNo
    HVI CertifiedYes
    Light Bulb Quantity2
    Light Bulb Wattage36 Watts (2-18W)
    Light Bulbs IncludedYes
    Lighting TypeFluorescent
    MaterialPolymeric
    Minimum construction space required2x8
    Motor engineered for continuous operationYes
    NightlightYes
    Product Weight10.6 lbs
    Project PackNo
    Rated Amps1.0
    Rated Sones - VerticalN/A
    Rated Watts33.5
    Sones1.0
    UL Listed for use over bathtubs or showers when connected to a GFCI circuitYes
    Wall InstallationNo
    Warranty3 Years
    Watts @ 0.1"33.5
  • Rated 4.8 out of 5 by 4 reviewers.
    Rated 5 out of 5 by Love the product I truly love the fan but the instructions that came with the product were wrong. I had to get on the website and actually write to the contact person for the website to get the proper install instructions e-mailed to me. Also it would be very valuable if you were to put what switches can or should be used along with the product on the outside of the box so i could have gotten them while i was at the hardware store, instead i had to run to the store a couple of times to get the right switches. March 17, 2014
    Rated 5 out of 5 by This product is really great compared to our old one This product is really great compared to our old one. The sound level is so low you can hardly tell it is on. It also takes out the moisture in the room a lot better than our old one. I have never had any moisture on our mirror like our old one did. I have had this product for over 2 years and never had a problem with it, and it was really easy to install. March 10, 2014
    Rated 4 out of 5 by good product both fans still working good purchased january 2012 February 20, 2013
    Rated 5 out of 5 by A big improvement I bought this fan to replace an older Broan fan which had been badly installed and I believe the motor had worn out after much use and abuse from the former owners of my house. My family was resisting using the fan and I was becoming quite annoyed. The new fan works and looks much better. It is much quieter and it was easy to install. Now my family is using the exhaust fan again and that make me happier. It is also nice it is a U.S. produced product too. Thanks for your fine efforts. February 20, 2013
    1-4 of 4
  • (6 Questions : 6 Answers)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    « Back
     
     
    Has staff answer
     
    1 answer

    QT110LE Retrofit Installation

    I want to replace the current bath fan in my home with thisQT110LE fan. Can this fan be installed from the bathroom or must I do the install from the attic? If I can retrofit from the bathroom do you have any instructions? If this cannot be a retrofit from the bathroom then what fan do you have that is?

    Thank you
    Age: Over 65
    Gender: Male
    1 year, 2 months ago
    Customer avatar
    by
    Roy
    Maple Grove, Minnesota
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for the question on the QT110LE exhaust fan/light/night light. This unit is much easier to install when you have attic or crawl space access from above. If you install this unit from below you will need to cut the ceiling opening larger than normally needed and patch the ceiling after the installation is done. We do have a comparable model that is designed to be installed from below. It is the model XB110L.
    1 year, 2 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
     
    1 answer

    Qt11oLE retrofit.

    I currently have a Broan fan only fixture on a single switch. Can the fan, light and night light be connected to the current single switch or does it have to be replaced with the 3 switch?
    Age: 55-64
    Gender: Female
    7 months ago
    Customer avatar
    by
    krp
    Frankfort, Illinois
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model QT110LE exhaust fan/light/night light. You can wire the QT110LE to a single switch and operate the fan and light together. You would also not be able to use the night light. If you want individual operation of the fan, light and night light, you will need to use three switches and run more wires.
    7 months ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Age: 45-54
    Gender: Male
    4 months, 2 weeks ago
    Customer avatar
    by
    kev
    Indiana, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model QT110LE. All of the QT series of fan/lights will have a night-light. You can cap off the night-light if you do not wish to use it. For further questions, please contact technical support at 800-637-1453.
    4 months, 1 week ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Age: 55-64
    Gender: Male
    2 months, 3 weeks ago
    Customer avatar
    by
    lri
    Ohio, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the model QT110LE exhaust fan/light. You can wire the fan and light to a single control, however, if the light is the only light source, a timer might shut down the fan and light while someone is taking a shower and this could be dangerous.
    2 months, 2 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
     
    1 answer

    How do I change the bulbs?

    I can't get the metal off the back to get into the bulbs, nor can I pinch the outer socket to remove the bulbs that way.
    Age: 55-64
    Gender: Female
    1 month, 1 week ago
    Customer avatar
    by
    Brenda
    Kingsville, OH, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question regarding the QT110LE exhaust fan/light. To change the bulb, you only need to remove the lens in the center of the grille. Insert a small, flat-blade screw driver between the grille and lens and gently pry the lens out. You can also call Technical Support at 1-800-637-1453 for further assistance.
    1 month, 1 week ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about BroanCustomerService is loaded.
    Additional information about BroanCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    2 next>>
    2 next>>