BPSF30Charcoal Replacement Filter for 30" wide QS Series Range Hood

  • Overview
  • Specifications
  • Reviews
  • Answers
  • For use with Broan brand range hoods. Broan filters are made from the highest quality materials to provide the longest life possible and keep your range hood operating at peak performance.

    • Replacement charcoal filters for use with the BPS1FA30, BPS2FA30 and BPS3FA30 Aluminum filters when installing hood as non-ducted operation; four in a pack, two required for replacement
    • CleanSense filters have a stripe feature on one side which changes color to indicate when it is time to replace the filter
    • Refer to the Installation Guide provided with your range hood or see the FAQ section on this site for proper filter maintenance and warranty
  • where can I get the clips that hold the filters up

    There are 2 clips that hold each filter up in place n the filter moved n the clips fell out n broke. I need these clips to hold the filters in place.
    Asked by: libby
    Hello, I just ordered some new clips from Broan at 800-558-1711. It will take a week to receive them. Hope this helps.
    Answered by: PAG1
    Date published: 2017-12-23

    How do the clips go in?

    I have the clips and the charcoal filter, but there no instructions. Do they just sit over the edge of the filter? What does that accomplish? What do they clip to and how? Thanks, Jeff
    Asked by: Jeff
    Thank you for your question on the model BPSF30 non-duct charcoal filters. The filters sit on top of the aluminum mesh grease filters and the clips hold them in place. Please contact the Technical Service Department at 800-637-1453 if you need further assistance.
    Answered by: BroanCustomerService
    Date published: 2015-04-08

    Can this prroduct be used along with the aluminum filters that come with the hood? Or do you have to take them out and replace them with these?

    Asked by: DAnthony
    Thank you for your question on the BPSF30 non-duct range hood filters. The BPSF30 filters would be used with the aluminum mesh grease filters, installed on the back of them, with clips that come with the non-duct filters.
    Answered by: BroanCustomerService
    Date published: 2015-08-10

    When installing a QS1 Allure range hood as ducted, what type of chracoal filter should be used ?

    Asked by: HIFI
    When ducting the QS1 to the outside, no charcoal filter should be used. These are only used in duct-free installations.
    Answered by: BroanCustomerService
    Date published: 2014-05-12

    When installing BPSF30 charcoal filters in the ALLURE QS1 model, do you also use the aluminum mesh filters that are included , to pair with them?

    Asked by: KC
    Thank you for your question on the model QS1 series range hood. The charcoal filters will attach to the back of the aluminum mesh filters with clips that come with the charcoal filters. You would then use both filters together in the hood, with the aluminum filter facing downwards.
    Answered by: BroanCustomerService
    Date published: 2017-12-14
    • y_2018, m_1, d_20, h_5CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_6
    • loc_en_US, sid_f8a04533-f12e-41b4-8960-102b4470f719, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan